|
 CABLE - BUY - 450 OHM LADDER-LINE
- Looking for 50 to 100 foot uncut balanced feed line (AKA, Ladder-Line) for a reasonable price.
Tell me what you have and it’s quality and price as an eMail. Reply via this ad.
Thanks for reading.
73s Frank
- Listing #1735079 - Submitted on 07/05/25 by Callsign K9AU, Modified on 07/06/25 - IP: 146-85-181-166.mobile.uscc.net
- Click to Contact -- Send this Ad to a Friend
 MISC - FS:Kenwood MC-80 desk microphone 
- I have a Kenwood MC-80 desk microphone with the original
box and manual...I'm the original owner. non smoker and the PTT is not yellowed out...I will take $100 plus shipping...Postal money order for payment.....WZ1U Steve / Lakeville, Ma
- Listing #1735148 - Submitted on 07/06/25 by Callsign WZ1U - IP: pool-72-93-81-242.bstnma.fios.verizon.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - ESSB TS530S package $ 775.00 shipped
- Classic Kenwood TS-530 with YK88C 500hz cw filter and the stock 2.4khz crystal filter has been replaced with the TS930S 2.7khz wider crystal filter so you can transmit and receive via this wider filter. Also, a 4 khz INRAD crystal filter has been installed in the SSB NAR slot so when you enable the NAR filter in SSB you widen out the receive bandwidth to 4 khz and still xmit through the TS930 YK88S2 2700 hz filter. A really slick set up for ESSB audio. Also included is the impossible to find Heil EQ200 two band equalizer wired for Kenwood 4 pin radios and yes, it works on this 530. Has 9 volt battery inside for power. I just turn off the EQ when I am not operating and over the course of 4 years it still has the same battery. Also included is the Heil audio patch cords to work the Heil HC4/5 microphone. Also a Kenwood SP520 spkr and digital remote VFO-230 is included. Prefer text for initial contact. Lane ku7i
- Listing #1735044 - Submitted on 07/05/25 by Callsign KU7I, Modified on 07/06/25 - IP: c-174-62-41-254.hsd1.nm.comcast.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- AMPHF - Clip-L w/Peter Dahl $ 850.00 shipped
- For sale is my VERY AVERAGE LOOKING Dentron Cliperton-L. Updated voltage doubler circuit with modern caps along with a PETER DAHL replacement transformer. Runs 2900 vdc on the plates in SSB position for the US made quad 572Bs or you can run it in the CW position and run quad 811As at 1800 vdc. This has four US made 572Bs. Output tank circuit updated for increased efficiency on 160. No tuned input. Auto tuners in my TS850 and TS930 work just fine for those bands that have a higher input vswr. $ 850.00 shipped. Better if you can come over for a demo. Lane ku7i Need to make room in my small 5X11 shack. Prefer text message for initial contact.
- Listing #1734651 - Submitted on 06/30/25 by Callsign KU7I, Modified on 07/06/25 - IP: c-174-62-41-254.hsd1.nm.comcast.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - R1451 WLR-6 Nixie or LED
- R1451 WLR-6 Sylvania...im looking for one of these...KE2BP
- Listing #1735146 - Submitted on 07/06/25 by Callsign KE2BP - IP: 172.59.213.182
- Click to Contact -- Send this Ad to a Friend
- RADIOVHF - WTB Motorola XTS 5000
- WTB Motorola XTS 5000 700/800 for to be used for nas and looking for one that doesnt have many scractches on the display and is unlocked and not locked by a password and comes with a atenna.
- Listing #1735144 - Submitted on 07/06/25 by Callsign KD8ICR - IP: syn-076-034-243-139.res.spectrum.com
- Click to Contact -- Send this Ad to a Friend
- MISC - AURSINC Radioberry Preamp Board V2
- AURSINC Radioberry Preamp Board V2, A Addition to Turn The Radioberry into a Small QRP Radio, Output 1.5W-3W for HF Power Ampfier (10W-100W PA), for Raspberry pi 4,4b
New in box, $75 plus $7 shipping. PayPal ok
- Listing #1735143 - Submitted on 07/06/25 by Callsign K7IEU - IP: c-73-225-151-127.hsd1.wa.comcast.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- ANTHF - SteppIR MONSTIR 4 element Yagi Antenna
- This is the original SteppIR MONSTIR with 3 full size STRAIGHT elements ( NOT THE PROBLEMATIC TROMBONE ELEMENTS) for 40/30 Meters. These elements are 70 feet wide. The 4th element covers 20 thru 6 meters. This beam automatically changes the length of the elements to change bands and give a correctly tuned antenna for the frequency you're on from 40 thru 6 Meters, or with the push of a button the antenna will reconfigure at 180 Degrees for fast short path-long path operation. Boom Length is 34 Feet. Widest element(s) are 70 feet. Turning radius is 39.8 feet. Good condition. Control box has Icom Transceiver Interface. The antenna is currently down and partially disassembled. Pickup in Anaheim, California, OR I can deliver to the Visalia (California) International DX convention April 15-17. It fits comfortably on the lumber rack on a full size pickup. Best reasonable offer takes it. The American Flag in the picture up at 100 feet and is 6 by 10 feet. Call Bill at (714) 269-9938
- Listing #1735142 - Submitted on 07/06/25 by Callsign N6MXU - IP: syn-172-088-226-074.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
|
= Ad was Edited or Renewed 
= Original Ad
Previous 10 Ads
