QTH.COM Ham Radio Classified Ads: TOWER - Swap amateur radio HF VHF equipment buy sell trade on line

WTB Tilt Plate: I would like to buy a tilt plate for my tiltover tower, preferably the lighter weight model. I am located in the Tampabay area and I’m willing to drive for pickup if it is within a reasonable distance. If not I’m willing to pay for shipping.; Listing #1760684 - Submitted on 03/02/26 by Callsign K4WIN - IP: 140.248.44.161; Click to Contact -- Send this Ad to a Friend
FOR SALE USTOWER RMC1000 CONTROl: For Sale US TOWER RMC-1000 control box for your tower.
Just found in storage
This box has the relays , timers , fuse and switch where you can operate it at the tower or remotely from your shack. The Blue control box shown for in the shack DOES NOT Go !!would need to fabricate a since set of switches for inside if you want to operate remote.
If you have a HDX 572, HDX 589, HDX689 , HDX772 or HDX5106 or even want to convert a military MTU 3107 Tower Trailer this will work. You will have to supply your own control box for inside. I have drawing.
$790.00 Shipping! This set With the complete kit consisting of limit switches and inside control uUS Tower is at $4900.00 this is a deal if you know what you are looking at!!!
Now if you have it the RMC -100 that’s always giving problems at your tower. Use this control box at your Tower and forget about the control inside. This will help save The motor!
73
WB4BMQ
Sweet Home Alabama
Call me; Listing #1760477 - Submitted on 02/28/26 by Callsign WB4BMQ - IP: syn-066-168-162-096.res.spectrum.com; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
FOR SALE: Wilson crank up mast, MT-61B: Mast is in good condition, has been repainted w/cold galvanizing. 21-ft collapsed. Weighs 800 lbs. With original manual, etc. Stored near Charlotte NC. $1000.00...; Listing #1755889 - Submitted on 01/15/26 by Callsign K4ZA, Modified on 02/27/26 - IP: 99-76-155-254.lightspeed.chrlnc.sbcglobal.net; Click to Contact -- Send this Ad to a Friend
For Sale: Universal Tower #HD 11-90: I have a Universal Tower Freestanding Aluminum Tower Model #HD 11-90. It is a 90 foot Tower that supports 11 sqft. The tower includes the following:
2 - 30 Straight sections
1 - 30 Taper section
1 - 26 Straight section
1 - 26 Taper section
1 - 22 Straight section
1 - 22 Taper section
1 - 18 Straight section
1 - 18 Top section for a 2" mast with a thrust bearing plate
1 - R - 18 Rotator plate
1 - B - 30 Base
Located in Southwest Tennessee for pickup.
$3500; Listing #1760097 - Submitted on 02/25/26 by Callsign KM4MRW - IP: mobile-166-194-154-005.mycingular.net; Click to Contact -- Send this Ad to a Friend
More ROHN 25 Tower parts: Still cleaning found 3ea NEW 6" galvenized Jaw-Jaw Turnbuckels $15.00 ea, Rohn Tower Guy equalizer $185.00, Rohn 25 Rotor plate $45.00. Or $250.00 for all plus Shipping.
73
David; Listing #1759745 - Submitted on 02/21/26 by Callsign AG4RO - IP: 108-231-181-78.lightspeed.mmphtn.sbcglobal.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
FOR SALE - ROHN ROTOR PLATE FOR 25G: Used condition with U bolts. $50 shipped CONUS. PayPal, credit card or check is OK.; Listing #1759697 - Submitted on 02/21/26 by Callsign K7JH - IP: 64-37-8-152.webb-dyn.skyviewtech.com; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
TX-455 / TRX80: Complete tower system. TX455 with TRX80 tilt over system. Custom 3'X3' tower mount built by professional tower installer & professional welder, superior to the T-base usually provided. Includes TB3 thrust bearing, rotor plate, rotor, coax standoffs, 8 element LPA antenna, heavy duty mast, 8 anchor bolt nuts (no anchor bolts included) large wrench for nuts. Never used heavy duty motor for raising and lowering tower never installed and no mounting to tower or attaching to winch included (motor only no switch box for reversing direction) all cable and winches in great shape. Located 10 minutes off I80 near Tannersville PA. Pictures on request and some on QRZ. $4,000.00 Steve WA8UEG; Listing #1759587 - Submitted on 02/20/26 by Callsign WA8UEG - IP: 24.115.131.150.res-cmts.sth3.ptd.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
U-Bolt Saddle Clamps W/Acc.: DXENGINEERING sell & have descriptions on U-Bolts and V Bolts and everything in the picture. All these items in the picture are from DXENGINEERING when you look at the picture it gives you the number of pieces and the part number (most of the parts has the alphabets and the numbers on it) and a the description of sizes (all sides) and the price of new saddle clamps it’s on the picture on the right side of the picture the price is $360.00 for new saddle clamps not for the other parts I have in the picture. I will not separate these parts (items). The sale price for all parts is $250.00
PS. I bought them from DXENGINEERING some are new and most of them were slightly used look up all the parts in DXENGINEERING catalog you can see what they are.
PS.I have other sale listings also 1757456, 1759375 take all three listings for OBO.; Listing #1757263 - Submitted on 01/29/26 by Callsign KB9VWD, Modified on 02/18/26 - IP: c-24-14-208-210.hsd1.il.comcast.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
DXENGINEERING Saddle Clamps W/ Acc.: DXENGINEERING U-Bolt, V-Bolt and Aluminum Saddle Clamps it starts with 5 pcs. of DXE-SAD-450A it’s good for tubing tower it’s 4 1/2” diameter DXENGINEERING don’t sell this part no more. 1 pc. DXE-CAVS-3P, 4 pcs. of 4” square bolts, 2 pcs. V bolt DXE-SSVC-2P, extra stainless steel nuts, lock washers, flat washers, 2 pcs. of DXE-SAD-200B 2 pcs. of DXE-200A, 6 pcs. of DXE-SAD-175A and three backing plates 3” x 1”, 3 pcs. of DXE-SAD-150A, 1 pc. of DXE-SAD-125A, 1 pc. of DXE-SAD-100A, 6 pcs. of stainless steel threaded rods 8” x 5/16”, stainless steel bolts 6”, 5”, 4 1/2” long, 2 pcs. of mast mounting type clamps. A lot of these items are new and slightly used. And the copy of size and cost of DXENGINEERING saddle clamps the new price is for saddle clamps is $369.00 it don’t include the new price for all the parts listed I cannot separate these parts (items). Sale price is $250.00 for all parts
PS. You can check out the other sale listings 1757456, 1759375; Listing #1759424 - Submitted on 02/18/26 by Callsign KB9VWD - IP: c-24-14-208-210.hsd1.il.comcast.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
Tashjian LM-470 Tower Work Stand: I have a nice Tower Stand that I used with my TashJian LM-470 Tower, only used a few times.. I don't climb anymore so maybe someone else can use this... I am asking $155 Shipped... I am not sure what other towers it will fit I have a picture of the Diagram with dimensions on a sheet in the picture if you need more info just contact me...this fits on Section 5 of the LM-70 Tower the highest section... Dimension is 13 7/8" needed for it to fit..
Tnx, Frank... N5WJ; Listing #1759204 - Submitted on 02/16/26 by Callsign N5WJ - IP: ip24-252-64-51.no.no.cox.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend